New Customers / Upgrades
855-334-6562
Tap to Call
Customer Support
866-484-4800
Tap to Call
855-334-6562 | Email us

How To Place Security Cameras

by Amy January 30, 2018

The placement of home security cameras is just as important as having them. My Alarm Center is strategic when deciding the location of your surveillance system.

Security cameras are installed at the front door, back door, and near first floor windows.

These locations are the most common entry points for intruders, according to statistics from the Bureau of Justice. Cameras are placed above doors and windows, outside your home, and facing downward. This way the camera can view a few feet in front of the opening. Exterior cameras have night vision and are waterproof. Some can be placed in the interior of the home, looking out, so that there is a view of the windows and yard outside.

Cameras have full view and are in focus.

The range of the camera determines the interior placement of cameras. Anything with a range of around 45 to 75 degrees should be aimed to specific areas like a doorway or garage entry door. Cameras with a full wide view of 75 to 180 degrees allow you to see a full room with just one camera.

Cameras watch over any valuables.

If you have a safe within your home, the camera is angled so that it can be seen. Any important hiding places are guarded with a camera as well. If there is a break in, this will help determine what was taken.

Cameras are kept out of reach.

It’s important cameras are kept in an area where they can’t be easily tampered with. If an intruder can break the camera or cover it, it will not be beneficial. Cameras are placed in areas that aren’t obvious but will maximize the view.

Cameras are connected to your home security system.

Security cameras can work strategically with your home security system and home monitoring to protect your home. They’re also great for home automation, allowing you to check home security feeds any time you wish.

Cold Weather Safety Tips

by Amy January 17, 2018

The winter season has arrived and it is important to stay safe throughout this bitterly cold period. My Alarm Center wants to remind you to prepare accordingly for the cold weather.

  1. Pay Attention To The Forecast

Pay attention to your daily and weekly weather forecast. Look out for low wind chills and winter weather advisories. This will help you dress accordingly if you must go out, pick up the supplies you may need, and prepare your home for the harsh elements.

  1. Plan Ahead

Plan for weather conditions that you do not expect. Keep an extra coat or blanket in your car. Keep extra food in the house. If your job is outdoors, plan a warm-up break. You never want to be caught off guard in the cold.

  1. Protect Your Home

A bad winter storm could knock out your power or even your heat. Generators and space heaters are wonderful to have but be cautious when using them. Space heaters should always be kept three feet away from anything flammable. Generators should never be hooked up to the homes internal wiring. The safest way to use a generator is to connect the equipment you want to power directly to it. Be cautious of your pipes freezing as well. When water freezes it expands and can cause a burst pipe. Flood monitoring can be used to keep you aware of any leaks before they turn into a flood. If you do lose heat, keep sinks running a trickle of water to help prevent pipes from freezing.

  1. Winterize Your Home

Consider installing weather stripping, insulation, and storm windows to protect your home from losing heat throughout the season. Insulate water lines that run along your exterior walls to help keep your pipes from freezing.

  1. Dress Warmly

Dress in several different layers. Ideally, your outermost layer will be wind resistant. Make sure to wear a hat or insulated gloves. Keep your face and neck warm with a scarf.

  1. Seek Shelter When Necessary

When the wind chill is low it can do significant damage to your body. Make time to get out of the cold and limit your time spent outdoors. There’s nothing like a warm home on a cold day. If you want to keep your house warm but not have the heat on all the time, you can use a smart thermostat with your home automation system to keep the heat low when you’re at work and warm your house up right before you get home.

  1. Stay Dry

Stay as dry as possible when it’s cold outside. Wet clothing chills the body much more rapidly. If you begin to sweat from the multiple layers, remove your outer layer or unzip your coat.

  1. Keep Active

The more physical activity you’re getting, the warmer you’ll be. Walking or running will help you naturally generate body heat.

  1. Be Aware

Be cautious of signs of frostbite and hypothermia. Children, the elderly, and anyone with circulation problems are more susceptible to the cold. The use of alcohol, tobacco, and certain medications will also increase susceptibility to the cold.

The Signs Of Hypothermia

  • A drop in body temperature.
  • Shivering, confusion, and loss of muscular control.
  • Loss of consciousness.

What To Do

  • Get the person inside and gently remove any wet clothing.
  • Lay the person flat and avoid rough handling, especially if they are unconscious.
  • Warm the person gradually and slowly, with any available sources of heat.
  • Seek medical attention immediately.

The Signs Of Frostbite

  • Skin appears white and waxy and is hard to the touch.
  • There is no sensation and the area feels numb or is tingling.

What To Do

  • Get inside a warm place.
  • Warm the area gradually with body heat or warm water.
  • Get medical assistance immediately.

My Alarm Center wants to remind you and your family to stay safe throughout the winter season. Remember to check the local weather forecasts and dress appropriately for the current winter conditions. If you notice signs of hypothermia or frostbite, make sure you contact medical personnel as soon as possible.

Tips For Better WiFi

by Amy January 2, 2018

There are many reasons your home wifi could be running slow and many ways to make it go a little bit faster. If you’re having problems with slow speeds and bad reception, try a few of these tips to increase your internet’s capabilities.

  1. Start With New Hardware

Ensure your network connection is reliable. Make sure you are using up to date equipment. Our technology has changed rapidly over the last several years, so old technology doesn’t always work to full capacity.

  1. Pick A Good Spot For Your Router

Make sure your router is in an open area without any obstructions from walls or other electronic devices. Some electronic devices have the capacity to block the wireless signal. The best place to keep your router is on a flat surface without anything else near it.

  1. Ensure You’re Using The Correct Wireless Channel

If several routers in a close area are using the same wireless channel, they can easily reduce the speeds of your wifi. Choose a channel that has as little signal interference as possible. Your router will include instructions on how to change your wireless channel if you do not know how to change it.

  1. Avoid Interference From Other Electronics

A wireless signal can be blocked by many different devices including cordless phones, microwaves, and televisions. Make sure your router is positioned away from any large electronics.

  1. Wifi Security

When installing your wireless router, set it up as a secured connection. This means you’ll have to provide a username and password to receive wifi from the router. If you use a good password, it will be difficult for any neighbors or strangers to hack your wifi. You can also hide the SSID, which is the name of your wifi. It will not appear as an option to log on to though. You’ll have to enter the SSID manually.

  1. Control Bandwidth Applications

Someone in your home may be hogging the bandwidth signal if they’re constantly streaming movies or video games. You can control the quality of service to prioritize certain applications.

  1. Install A Wifi Extender

A wifi extender is essentially a second router that will capture the wifi signal and allow it to reach further. This is especially helpful in a home with brick walls or other blockers to the wifi signal.

  1. Restart Your Wifi On A Regular Basis

It is important for your wifi to be turned off and rebooted on a regular basis. This will allow it to update. It is possible to set it on a rebooting schedule so that it turns off in the middle of the night when you’re not using it.

  1. Switch To 5GHz

Most wifi providers offer a dual band router, which gives you two different signals to connect to. 5GHz is a faster signal than 2.4GHz, but 2.4GHz has a wider range. Older devices might not be compatible with 5GHz. 5GHz is a less congested signal than 2.4GHz, which makes it ideal for those living in condos or apartments.

  1. Turn Off Eco Mode

Some routers are made to save energy though they have the tendency to reduce your wifi speed and signal. Turn off the power saving, or eco mode, to restore the proper speeds to your router. These may be on by default and do not save a significant amount of power.

It’s important to have a fast wifi connection. Make sure you protect your wireless signal with a secured connection and utilize these tips to improve your wifi speeds.